SHUTTING OFF YOUR WATER MAIN: KEY ACTIONS FOR HOMEOWNERS

Shutting Off Your Water Main: Key Actions for Homeowners

Shutting Off Your Water Main: Key Actions for Homeowners

Blog Article

More Details

The content following next about How to Turn off the Water for Plumbing Repairs is truly informative. Have a go and draw your own personal conclusions.


How to Turn Off the Water in an Emergency
The most common places a water pipe will certainly be found in house is in your boiler room, basement, or a removed panel in an area for your house.
Once you locate the water pipe you will simply transform the valve clockwise to shut all the water off in your house up until you have ended up the repair service. Some homes will certainly have a ball shutoff with a lever that you can draw instead of resort to shut the water off.
If you attempt to shut the water off to your fixtures by using an angle quit and that does not function you will certainly need to shut of the water pipe to make your repair service. There are additionally many various other factors you could require to shut the water main like repairing frozen pipelines, repairing leakages, replacing components or faucets.
Lots of people are not aware that they also have a water main shutoff right in their own home and also just call a plumber of never end up doing the repair until things get really bad because they simply do not know that shutting the water pipe is actually very easy.

How to Find and Shut Off Main Water Shutoff Valve


Where is the main water shutoff valve located?


This is the million-dollar question. Your main water shutoff valve could be located in several different areas. If you have a home with a basement and crawlspace, it is probably located on an interior wall near the front of the house, where the water comes in from the water meter. In this case, it is most likely hiding in plain sight. If your home was built on a slab, the valve might be located near the hot water heater or inside your garage.


How to Turn Off Main Water Valve


Once you find the shutoff valve you will either hand turn it (clockwise for gate valves and perpendicular to the pipe for ball valves) or use the appropriate tool depending on the design.


If it is located inside your house, it will most likely be a gate or “wheel” valve that you’ll simply turn clockwise to stop the flow of water. Another way to shut off the water is to go to the water meter box. Just be careful not to mess with the city shutoff side of the meter.


Where are the isolation valves?


Isolation shutoff valves are much easier to locate. Most essential home plumbing fixtures have separate valves that control the water flow. Sinks, toilets, water heaters, and washing machines should have a small valve located near the plumbing that can easily shut off the individual water supply.


Simply turning the valve clockwise will turn off the water flow. Sink and toilet problems can be dealt with quickly by simply shutting off the supply this way. It’s always good to test the isolation valves periodically to make sure they are working properly.



Again, once your tighten the water shutoff valves and turn off the water, open up your hot and cold lines to release pressure and test if the water is indeed off.



Make it a priority to locate the water valves in your home – and keep plumbing problems from turning into costly repair situations.

https://happyhiller.com/blog/how-to-find-shut-off-main-water-shutoff-valve/


How to Locate & Turn Off Main Water Shut-Off Valves

I am very excited about How to Locate & Turn Off Main Water Shut-Off Valves and I hope you appreciated the blog entry. If you liked our blog posting plz don't forget to share it. We enjoy reading our article about How to Turn Off Water To House and Prevent Damage.


Schedule And Pricing

Report this page